Majid Zamani; Mohsen Shayesteh
Abstract
Using the experimental data in nuclear computing to verify the calculation methods and tools based on numerical and statistical methods has many benefits such as illustrating the quality, ensuring the capabilities, and computer codes validating. Simulation by computer tools is also applicable in the ...
Read More
Using the experimental data in nuclear computing to verify the calculation methods and tools based on numerical and statistical methods has many benefits such as illustrating the quality, ensuring the capabilities, and computer codes validating. Simulation by computer tools is also applicable in the safety analysis of research reactors. In this research, the computer tool (MCNPX 2.7.0: 2011) was verified against the experimental data of neutron flux and spectrum on the sample position of the Tehran Research Reactor (TRR) neutron imaging system by the neutron activation method. To determine the benchmark specifications, the simulation of the system was done at the first step by considering a well-defined facility geometric, material specification and reactor core configuration, fuel elements, and radiation facility (beam tubes and collimator, reactor core, and neutron imaging components). Then the flux and neutron spectrum at the sample position were calculated. In the second step, a set of In (bare and covered by cd) and Au foils and a set of Au, Ni, Ti, and Zr, were placed and exposed almost in front of the reactor E beam tube. The neutron energy spectrum was unfolded by calculating the saturation activity of each foil by SAND-II code, and the neutron flux was calculated. A comparison of the results obtained in two steps shows a relatively good and acceptable agreement (Max. 30% deviation) between the flux and the shape of the flux profile obtained from calculations and experimental data.
